flange
Wörterbuch
-
exhaust steam flange
-
exhaust flange
-
mating flange surface
-
companion flange
-
reception flange
-
fixing flange
-
blank flange
-
flange
-
inlet flange
-
flange
-
tapered flange
-
parallel flange
-
flange puller
-
flange width
-
flange receptacle
-
flange heating
-
flange bearing
-
flange connection
-
flange bolting
-
thread in flange
-
top flange plateGurtplatte für Kranträger
-
large flange hub shell
-
flange of boiler end
-
cross-type flange joint
-
coupling flange
-
bearing flange
-
bearing flange tube
-
loose-type flange
-
shell flange channel end
-
mounting flange
-
mounting flange
-
small flange hub shell
-
upper flange
-
top flange
-
top flange
-
upper flange
-
to flange
-
flange coupling
-
floating head flange
-
flange
-
lower flange
-
bottom flange
-
square flange
-
to flange-mount
-
flange-monting
-
flange mounted
-
to flange
-
loose flange
-
flange
-
rim flange
-
fixed flange
-
defective rim flange
-
rim flange height
-
flange width
-
flange height
-
flange edge radius
-
flange radius
-
detachable spring flange
-
hub flange
-
detachable spring flange
-
detachable endless flange
-
removable flange
-
detachable flange rimabnehmbarer Seitenring Felge
Beispiele im Kontext
-
As asbestos may be present in flange gaskets, isolate the flanges and cut the piping before and after the flanges.
Da Asbest in den Flanschdichtungen vorhanden sein kann, isolieren Sie die Flansche und schneiden die Rohrleitung vor und nach den Flanschen.
-
Isolate the oil cooler piping flanges (asbestos may be present in flange gaskets), then cut and remove before and after the flanges (See figure 40).
Isolieren Sie die Ölkühlerorhleitungsflansche (Asbest könnte in Flanschdichtungen vorhanden sein), danach vor und nach den Flanschen abschneiden und entfernen (siehe Abbildung 40).
-
hot gas welded flange at check valve flange
Gas-Konvektions-geschweisster Flansch bei Scheck-Ventil-Flansch
-
PUT THE CABLE FROM THE SOCKET INTO THE FLANGE IN THE MM AND PUT THE SOCKET ON THE FLANGE.
Stecken Sie das Verbindungskabel die Fassung in die Flansch in der MM UND Stellen Sie den Fuß auf dem Flansch.
-
During this procedure the component is added to the flange (flange is premounted in PM 022).
Bei diesem Vorgang wird die Baugruppe in den Flansch gefügt (Flansch wird in PM 022 vormontiert).
-
Air heater, design: Cu/Al sheet galvanized, with flange and counter-flange, with draining ½“
Lufterhitzer, Design: Cu/Alu-Blech verzinkt, mit Flansch und Counter-flange mit Entwässerung ½ "
-
the steel baems must have a flange width if minimum 75 mm up to maximum 190 mm and a flange of minimum 5 mm an maximum 22 mm
die Stahl baems muss eine Flanschbreite, wenn mindestens 75 mm bis maximal 190 mm und einen Flansch von mindestens 5 mm eine maximale 22 mm
-
The whole VC-flange behaves like a very strong spring. This is achieved due to spring segments bolted directlyto the flange.
Das gesamte VC-Flansch verhält sich wie ein sehr starkes Frühjahr. Dies wird erreicht durch den Frühling Segmenten nicht direkt mit dem Flansch verschraubt.